How to setup TP-Link router | A detailed guide

In this Article we are going to discuss how to setup TP-Link Router

  • First get  a broadband connection from any of the ISP (internet service provider) like Fiber Act, Airtel Broadband, BSNL etc
  • Connection of ISP totally depends what options you have in your area.
  • Most of the rural areas have BSNL broad band.
  • You can buy a TP link router from online store like flipkart or amazon
  • You can also tell your ISP to get you a router and you can pay for it to the ISP.

How to setup TP-Link router

  • First you need to get a broadband connection from an Internet Service provider.
  • After they confirms your wifi connection, they will come to your house with cables which will be used for your internet.
  • After the cables are setup and your ISP is ready to provide you internet connection
  • You need to place the ethernet cable into your wifi router which is present at the back of your router.
  • You can see in the below image.
  • Once you have placed the ethernet cable and switched on the router you can Connect to the router via Wi-Fi, or Ethernet cable 
  • If you have a new router, just from the store, then the wireless network will have a standard name. Something like “TP-LINK_1234” or similar to it
  • You are connected now, you can launch any web browser on your PC. Mostly in TP-Link this is the address 192.168.1.1, or 192.168.0.1. Or some domain name.
  • Just look at the sticker from the bottom of the device. There will be specified the IP-address and the standard login and password, which we also need:
  • Can be specified by hostname: The IP address can be 192.168.0.254 if you own a TP-Link Access Point:
  • Type the router IP address in the address bar of the browser and hit Enter. A window should appear in which you need to specify a username and password. Here everything is simple: the standard password is admin, the username is also admin. If you changed this information, then specify your own. If you forget them, you will most likely have to reset the router so that you can again use the standard data to enter the control panel. In a few seconds you are logged in to your TP-Link router settings.
  • Now the control panel of your TP-Link router should open. It may be old green-colored TP-Link config page:
  • Old web interface of TP-Link router
  • or new design of the settings page if you own a modern TP-Link router:
  • Modern web interface of TP-Link router.

How to Access TP-Link Router Config Page From A Phone or Tablet

  • The easiest option to get into admin page of a modern TP-Link wireless router is to use Tether app by TP-Link for Android or iPhone. All you need to do is install and launch the app and then only enter the username and the password. The IP-address of your router as well as the port will be detected automatically by the app:
  • If you have an older router model which is not supported by Tether app you can enter the config page the same way as you do on your PC. Just open the mobile browser ob your iPhone or Android, type http://tplinkwifi.net in the address bar  and then your login and password:

How To Log Into TP-Link Router Settings

I struggled a lot with my router and decided to research about how to setup my TP-link router. The main problem was how to login into TP link router because back in the days I had hardly any knowledge about setting up wifi- router and I struggled everytime whenever there was some issue with my router. So I did a lot of research and found out that it was just few simple steps and you can configure any router especially TP link router. 

Actually its very easy to setup your router. You have all your information On your router that you need while setting up your TP- link router. And once you setup your router you can easily login into your TP-link router. 

To login into TP-link we need the domain, username and password.All these information are present of the back of yout TP-link router. Just flip it over and you will see. Even if an IT guy has setup your wifi router but its better that you also know how to setup your router because in the future you may need to do some changes in your wifi and you dont want to call an IT guy everytime for some small changes. It involves both time and money.

For example: changing the password for Wi-Fi, getting the forgotten password in the settings of your TP-Link, solving problems with Internet connection or updating  the firmware. And it is too expensive to call a tech person each time you need to do it. You can do everything yourself in a couple of minutes, 

How to login into TP-Link router

Here are the few steps:

  • You need to first connect to your Wi-Fi router. 
  • You can connect it by two ways- 
  • If you are in a network means wired internet and not wifi then just plug the lan cableI into your system 
  • If you are using a wifi- switch on the router and in few seconds you can see a wifi name TP-link in your wifi search area.
  • Initially it wont have any password so you can directly click on the wifi name and it will connect but wait its not finished yet
  • Go to your browser(any browser will work) and type the domain name or the tplink url or 192.168.1.1, or 192.168.0.1 that is present at the back of your router. It depends on the router model so its important you check what domain name is mentioned in your tplink router
  • When the webpage opens you will see username and password.You need to enter your user name and password that is present at the back of your tp-link router. Mostly username and password both are admin but you need to confirm it once by looking at the back of your tp-link router. Enter the user name and password in your tp-link router url and clik login. You will be successfully logged in to your TP-Link router settings.

 

Conclusion

I Hope this article helped you to get all the answers related to TP Link Router setup. Stay tuned to Studybulletin for more such contents.

Also read

IFTTT If this then that | Explained by Studybulletin

Soovle tool- The Usability guide | Studybulletin

Record Zoom Meeting without Host Permission

2 thoughts on “How to setup TP-Link router | A detailed guide”

  1. Pingback: Tips on how to delete whatsapp backup from Google drive - Easiest way 

  2. Pingback:  How to start Podcasting  journey this year - A Guide

Leave a Comment

Your email address will not be published.